How To Add Data Analysis Toolpak In Excel Mac

A powered-off iMac, MacBook, and various peripherals. — AKA-Photo/Shutterstock.com

If your Mac won't boot, there's nonetheless a good gamble you can recover the data. Here'southward how you can go your files off your Mac's internal bulldoze—fifty-fifty if macOS keeps crashing or refusing to start.

Got a Recent Backup? Use That
Got an Intel Mac? Employ Target Deejay Mode
Got an Apple tree Silicon Mac? Use Mac Sharing Style
Re-create Your Data Using Recovery Mode
- Decrypting Your FileVault Bulldoze (Last)
- Decrypting Your FileVault Drive (Disk Utility)
- Copy Files Using the Command Line
Consider Physically Removing the Drive

Got a Contempo Backup? Use That

All-time practice dictates that y'all regularly back up your Mac to an external location. Yous can utilize Fourth dimension Machine and a elementary external USB hard drive to exercise this or set upwardly a more elaborate networked solution.

When the worst happens and your Mac fails to boot, you tin can simply plug your Time Machine disk into another Mac and access your files from there instead. This method assumes you have a contempo backup and that the backup includes the files you lot wish to access.

To access your files, plug your Time Car drive into another Mac (or mount the network location if you're using that method). Admission the volume via Finder nether the "Locations" department of the sidebar.

Double-click on the "Backups.backupdb" folder followed by the folder that matches the name of your Mac. You'll now meet a listing of folders that represent each split up fill-in performed. "Latest" is where you'll find your nearly recent fill-in.

Recover what you need or use the search bar in Finder to detect specific folders or files. Do you accept a new Mac that you want to restore your old files to? Learn how to restore a Mac from a Time Machine backup.

Got an Intel Mac? Use Target Deejay Mode

Target Disk Fashion tin can be used to share your (unresponsive) Mac's drive with some other Mac to transfer files, provided the source Mac isn't using Apple Silicon. You can check if yous're running Intel or Apple Silicon nether the Apple > About This Mac menu.

Get-go, connect both Macs using a Firewire or Thunderbolt cable (this won't work with a standard USB cable). Now make sure that the Mac you lot desire to share from (the source) is switched off. On the source Mac (the one that won't boot), press the power button and so immediately hold T and expect to kick into Target Disk Mode.

At present turn your attending to the second Mac. The source Mac's drive should appear on your desktop (or in the Finder sidebar under "Locations") once Target Disk Style has been initiated. Double click on the drive to access it.

If the drive is encrypted with FileVault you should be prompted for the password which macOS can utilize to decrypt the volume. At this stage you can transfer any files yous may demand. Eject the drive and switch off the source Mac when you're done.

RELATED: How to Boot Your Mac in Target Disk Mode for Easy File Transfers

Got an Apple Silicon Mac? Employ Mac Sharing Mode

If you lot're trying to share filesfrom an Apple Silicon-equipped Mac with an M1 flake or subsequently, you can use Mac Sharing Manner. This is very like to Target Disk Mode, though information technology works a petty bit differently.

First, connect your 2 computers using a USB, USB-C, or Thunderbolt cable. Make sure the Apple tree Silicon Mac (that you want to share from) is turned off, then press and concord the ability button until y'all run across "Loading start-up options" on the screen.

From here select "Options" followed by "Go on" and enter your password when prompted. Your Mac volition kick into Recovery Mode, at which point you'll be able to select Utilities followed past Share Disk. Select the deejay you lot would like to share, then click Showtime Sharing.

On your other Mac (the i you're transferring filesto) open up Finder, scroll downwards to the bottom of the sidebar, and click on Network in the "Locations" section. If all goes well, you should run into the Mac y'all're trying to copy data from announced. Double click on it and so click "Connect" Equally followed by "Guest" then hit "Connect" to finalize the procedure.

You should now be able to see your Mac's files and transfer anything you need. Squirt the disk and close down your (Apple Silicon) source Mac when you lot're done.

Re-create Your Data Using Recovery Mode

Apple tree includes a recovery partition on every Mac and then that even if macOS won't boot normally, you should be able to get into Recovery Mode to fix the problem. Recovery way includes some useful features similar a Last window, the power to reinstall macOS, and Disk Utility for erasing and partitioning drives.

Older Intel Mac owners can boot into recovery fashion by belongings Control+R at startup. If you have a newer Apple Silicon Mac, shut downwardly your computer and then press and hold the ability button until you see "Loading startup options" then select Options > Continue.

If your bulldoze isn't encrypted with FileVault, you tin access your files immediately and skip to the "Copy Files Using the Command Line" section beneath. Well-nigh drives are encrypted by default so if you aren't certain, go on with the next step (you'll be able to check using a Terminal command).

Decrypting Your FileVault Drive (Concluding)

You lot can practice this via Concluding using the control line, or via Deejay Utility. If you'd rather do this via the graphical Deejay Utility, skip to the next section.

As soon as Recovery Mode boots and you see a list of Utilities, click on Utilities > Last at the pinnacle of the screen to open a new Terminal window. Type diskutil apfs list into Last and hit Enter.

Find Disk Identifier

This volition provide a list of APFS-formatted drives currently connected to your Mac. Look down the list until you discover one that matches your principal bulldoze (it will probable be the only 1 labeled as "FileVault: Yes (Locked)"). Note the disk identifier in the "APFS Physical Store Deejay" field. In our case it'south disk2s1. If none of your partitions are locked, you can skip to the next department.

You'll need the FileVault countersign (the password you employ to unlock your Mac) for this next footstep. Enter the following into Last diskutil apfs unlockVolume /dev/identifier but replace identifier with the label yous made a note of in the previous step, due east.g. disk2s1.

Unlock FileVault Partition Using Terminal

When prompted, type your password followed past Enter. If you make a mistake, enter the previous command and attempt again. If you get the password right, your disk has now been unlocked and mounted. Now it'southward time to copy information to another drive.

Decrypting Your FileVault Drive (Disk Utility)

Rather than using the Concluding commands in a higher place, y'all can attempt doing this graphically with Disk Utility. We institute the Terminal method worked in a case where Disk Utility didn't. If the graphical Disk Utility method doesn't work for yous, effort the Terminal commands in a higher place. (If you used the Terminal commands already, you don't take to utilise the Disk Utility.)

Quit whatsoever Terminal windows so that the macOS Utilities window appears over again, and select Disk Utility from the list. You lot should see your hard bulldoze listed on the left of the screen in the "Internal" section. If it'southward greyed out and so it'due south encrypted and non mounted.

Click on the "Data" division on the left, then click on the "Mount" button at the top of the window. You will exist prompted for your FileVault countersign, enter it and click the "Unlock" button. Your FileVault sectionalization will be unlocked and mounted.

Mount Parition in Disk Utility

Copy Files Using the Command Line

Y'all tin can't run Finder in Recovery Style, then any files will have to be copied manually using Terminal. This is easy if you know where your files are located, or if you have a sufficiently large external drive that you lot can only copy everything (or just your user directory, if you lot'd rather).

You lot can use the ls /Volumes/Macintosh\ Hd/ control to see an overview of your directory construction. Any directories with spaces in the proper noun crave a backslash before the space in commands. For instance, a folder called "My Photos" becomes /My\ Photos/ instead.

List Directory Contents in Terminal

Any external drives y'all connect should be mounted automatically past the system. You tin use ls /Volumes/ to check for the presence of the drive. If you can't observe the drive, quit Terminal to get back to the principal macOS Utilities window. From here select Deejay Utility, then look for the bulldoze. If it doesn't show up, disconnect and reconnect until it does.

Quit Disk Utility then launch Concluding using Utilities > Final. At present apply the cp command to re-create files, with the -R flag to copy recursively (which includes all directories and files in a given location).

And so let'southward say for a moment yous want to copy the entire user binder for a user called "htg" on the "Macintosh HD" partition to an external drive named "Rescue Deejay". The command you'd use to practice this would be:

cp -R /Volumes/Macintosh\ HD/Users/htg/ /Volumes/Rescue\ Disk/

Replace the user "htg" with your own user (run ls /Volumes/Macintosh\ HD/Users/ to observe it) and the destination drive with your own. The entire folder volition be copied to the root directory of your external drive, assuming you accept space to practice so.

Copying Files Using Terminal

If you want to copy the contents to a specific folder on your external drive, utilize the mkdir command to exercise so earlier yous first, for case: mkdir /Volumes/Rescue\ Disk/fill-in to create a folder titled "backup" in the root directory.

Consider Physically Removing the Drive

1 last option is to physically remove the drive within of the Mac and mount information technology in another figurer. Since there is a lot of variance in the types of drives Apple uses, specific instructions will differ depending on your device.

The get-go matter you should do is look upwardly your Mac model. You'll find the series number printed on the outside of the chassis somewhere (on the bottom of your MacBook, for example) which you can so plug in to checkcoverage.apple.com to get your precise model, year, and release date.

With this information, head to iFixit and look up your Mac model to detect out how to get into the chassis. Yous volition probably need a set up of TORX screwdrivers for this, and you should accept precautions like using an anti-static wrist strap and safely storing the screws until you need them over again.

From here the directions will ultimately depend on the drive. If the Mac is especially former it may have a mechanical hard drive or an older solid-state drive. Nearly Macs now utilize M.2 or NVMe drives, some with proprietary connectors.

With the drive removed, yous'll demand to piece of work out how to adhere information technology to another reckoner or a Mac. There are interfaces for M2 and NVMe drives that can make this process much easier, while a SATA to USB adapter will work for older SSD and HDD models.

Unfortunately, getting another machine to recognize your drive might exist the biggest stumbling block. Will Haley's web log has an excellent business relationship of navigating this process, from finding an adapter to mounting the HFS+ sectionalisation in Linux.

If the drive is encrypted with FileVault, this may be a lot harder—especially if you're not using macOS for the recovery process. If y'all are using macOS, try the following:

Open a Terminal window and find the (APFS-formatted) volume you would similar to mount using the diskutil apfs list command.
Make a note of the volume identifier, for instance disk1s1 .
Enter the post-obit control, replacing disk1s1 with the identifier you previously noted: diskutil apfs unlockVolume /dev/disk1s1
Enter the password you lot would use when logging in to your Mac to decrypt the volume when prompted.

For a more in-depth expect at decrypting FileVault volumes using Terminal, check out this excellent blog mail by Der Flounder.

Now, Gear up Your Mac

With your data (hopefully) prophylactic, it'south time to turn your attention to that Mac that won't kicking. Nosotros've got a whole list of things to effort when your Mac won't kick, merely if none of those work then you might need to reinstall macOS from scratch and start again. Practiced luck!